Solinst Model 3001 LTC Levelogger Edge Series (15 to 600 feet)

Solinst Model 3001 LTC Levelogger Edge Series (15 to 600 feet)

Availability: In stock

Level, Temperature, Conductivity

The LTC Levelogger Edge logs conductivity, water level and temperature. It combines a datalogger, 8-year battery, Hastelloy® pressure sensor, temperature detector, and conductivity sensor within a small waterproof housing, 7/8" x 7.5" (22 mm x 190 mm). A Titanium ceramic PVD coating protects the body against corrosion. The conductivity sensor is a 4-electrode platinum sensor, with autoranging capabilities. The minimal maintenance, sealed LTC Levelogger Edge is simple to clean and calibrate, even in the field. Using Levelogger Series Software, it displays conductivity, temperature, and temperaturecompensated water level.

* Required Fields




  • Corrosion resistant Hastelloy pressure sensor
  • Titanium ceramic PVD coating
  • 4-electrode platinum conductivity sensor
  • Single or multi-point conductivity calibration
  • Basic and advanced data compensation options


Level Sensor: Piezoresistive Silicon with Hastelloy Sensor
Ranges: 5, 10, 20, 30, 100, and 200 m
Accuracy: ±0.05% FS
Units of Measure: cm, m, ft, psi, kPa, bar (ºC, ºF)
Normalization: Automatic Temperature Compensation
Temp Compensation Range: 0ºC to 50ºC
Temperature Sensor: Platinum Resistance Temperature Detector (RTD)
Accuracy: ±0.05ºC
Resolution: 0.003ºC
Conductivity Sensor: 4-Electrode Platinum
Full Range: 0 to 100,000 μS/cm
Calibrated Range: 50 to 80,000 μS/cm
Accuracy: ±1% > 30,000 μS/cm; ±2% 500 - 30,000 μS/cm; ±30μS < 500 μS/cm
Resolution: ±0.1 μS/cm
Temp Compensation Range: 0ºC to 50ºC
Normalization: Specific Conductance @ 25˚C
Battery Life: 8 Years (1 reading every 5 minutes)
Clock Accuracy: ±1 minute/year (-20ºC to 80ºC)
Operating Temperature: -20ºC to 80ºC
Maximum Readings: 27,000 sets of readings in FRAM memory
Memory: Slate or Continuous
Communication: Optical Infra-red: USB, RS-232, SDI-12
Size: 7/8" x 7.5" (22 mm x 190 mm)
Weight: 7.05 oz. (200 grams)
Corrosion Resistance: Titanium ceramic PVD coating
Wetted Materials: Hastelloy, 316L Stainless Steel, Delrin®, Viton®, Titanium ceramic PVD coating
Sampling Mode: Linear, Event &amp; User-Selectable with Repeat Mode, Future Start, Future Stop, Real-Time View
Measurement Rates: 2 seconds to 99 hours
Barometric Compensation: Software Wizard and Barologger Edge